warehouse rack will affect the space utilization
- Aug 18, 2017 -
warehouse rack will affect the space utilization, the narrower the channel, the higher the space utilization, however, the layout of warehouse rack planning, also need to consider the management and storage methods, that is, whether the need for advanced first out, the need for forklift access and so on. Here is a brief introduction.
The number of aisles between shelves is inconclusive, warehouse rack but is determined on the basis of the site situation and actual needs.
Manual access to goods, generally between 80mm to 120mm; forklift access operations, specific look at the model of the forklift, the smallest forklift to stay 2 meters, warehouse rack usually left 2.4m or 2.6m, some large forklift trucks may need to stay 4 meters. At the same time, in accordance with the management requirements, reduce the number of aisles, such as dual-depth shelves than ordinary heavy-duty shelves cut half the channel, driven into the rack is a whole-type shelves, fewer channels, but the two shelves of the selection rate can not reach 100%, suitable for batch FIFO warehouse.
So, how to calculate the specific storage aisle?
1, the entire manual handling operation, warehouse rack the location piece distance is larger than the maximum box used in the location of the width +20cm.
2, the bottom of the location need to put the stack board, the upper layer is manual handling, the distance between the location of the "manual forklift + pallet" of the rotary diameter +20cm.
3, the location needs electric forklift handling, warehouse rack the distance between the location of the "electric Forklift + top pallet" can rotate diameter + turn off insurance distance.
4, the location needs fuel forklift truck, warehouse rack the distance between the location of "fuel forklift truck + Stack Board" can rotate diameter + turn off insurance distance.
Related Industry Knowledge