Categories

Contact Us

Nanjing Veida Logistics Equipment Co.,Ltd
Contact: Mandy Zhang
Address: shengtai Road No. 38 Jiangning District, Nanjing City, Jiangsu Province
Mobile: +8613451802300
Tel: +8613451802300
Fax: +86-25-52123411
E-mail: wd.marketing@veidarack.com
Website: www.veidarack.com

Tray racking features

- Mar 22, 2018 -

1. Pallet-type shelves have large spans and high loads. The span (length) of a pallet rack is mainly determined by the size of the pallet. Generally, one shelf can hold two conventional pallets. If a single pallet carries a large load (more than 3 tons), only one pallet per floor can be placed. 2. The tray shelf structure is stable. Due to the high load requirements of the pallet racks, the stability of the pallet racks. There are also special requirements. The bottom of the tray shelf must be installed with expansion screws to ensure the stability of the tray shelf. 3. Pallet shelves do not need laminates. In general, pallets do not require laminates. Simply install crossbeams on the crossbeams and install two crossbeams per pallet. This will maximize cost savings. 4 tray shelf layer can be customized. The number of pallet shelves can be determined based on the height of the warehouse, the height of each pallet, and other conditions. The bottom floor can be used without beams, and the tray is placed directly on the ground. 5. The high utilization rate of pallet racks, flexible and convenient access, supplemented by computer management or control, can basically meet the requirements of modern logistics systems.

www.veidarack.com

Previous: Detailed structure characteristics of cantilever shelves Next: What are the principles and characteristics of shelf design

Related Industry Knowledge

Related Products