 Mp / Whatsapp / Wechat: +86-13951807639      Email: weierzhou@wdracking.com
Home / Products / Radio Shuttle Rack / Steel Material Warehouse Radio Shuttle Racking
Share to:

Steel Material Warehouse Radio Shuttle Racking

The Steel Material Warehouse Radio Shuttle Racking has independent charging radio shuttles, allowing pallets to run on a guide rail with the control of a manual radio. The shuttle can reach under the pallets to access the goods that are stored deep within the rack system, lifting them from the guide rail and sending it to the front-end exit. Then you can use either a forklift to extract the goods or move the shuttle to another guide rail.
  • Nanjing, China
  • L/C, T/T
  • 500000 Tons/ Month

The cold storage rack is a Steel Material Warehouse Radio Shuttle Racking, radio shuttle racking, and radio shuttle system. The high-density storage solution is commonly used for cold storage solutions. By definition, a shuttle is a fast means of transport that travels between two fixed points at frequent intervals. Mecalux’s Pallet Shuttle fits this description precisely. However, its journey starts at the front of the racks up to the first available space in the storage channel, and back again (vice versa operation to unload).

Push back pallet live encounters problems with pushing at height and drive in systems past a certain number of rails in the height very quickly encounter selectivity problems. First in first out pallet live requires a very consistent placement of pallets to avoid ‘crabbing’ which becomes harder to achieve the higher up you go. The motorized shuttle solves these problems by allowing pallets to be placed at the height at the front of the rack without straining the mast or pushing. A pallet can be placed onto the shuttle at the front of the rack and be reliably transported further into the rail without the risk of crabbing or catching.

Whilst drive in becomes slower to operate the higher up the storage rails go (greater care to position properly is required at height). The radio shuttle negates these issues with the shuttle itself doing the positional work for you and guaranteeing the optimum position every time. All that is required is that the pallet is placed well enough between the rails at the front of the rack.

Features of Steel Material Warehouse Radio Shuttle Racking

● Greater diversification since each channel houses a different item.

● High productivity through increased inflows and outflows of goods.

● Greater capacity, i.e. deep store pallets in up to 131 ft lanes.

● Highly cost-effective, thanks to reduced operating costs.

● Decreased incidents and maintenance costs.

● Multiple advanced functionalities easily controlled from a single tablet.

Key Specifications of Steel Material Warehouse Radio Shuttle Racking

● Maximum Load Capacity: 3,300 lbs

● Speed: 5 ft / second (no load), 3 ft / second (with load)

● Pallet sizes: Compatible with most common pallet sizes in the USA

● Battery: 48V, 30AH

● Run Time: At least 8 hours on a single charge

● Charge time: 3 hours

● Battery Life: 1000 charge cycles

● Noise level: < 60db

● Additional technical specifications are available upon request.

Steel Material Warehouse Rack Storage Radio Shuttle Racking

Steel Material Warehouse Radio Shuttle Racking Detail Intruduction:
Model Radio Shuttle Rack
Pallet Size A) W1200*D1000mm B)W1200*D1200mm C) W1200*D1100mm D) W1200*D800mm
Materials Optional A) Quality Steel Q235A used for normal temperature storage situation
B) Quality Steel Q235B used for cold storage room
C) Environmental protection powder for surface treatment--powder coating
Craft-work A) hole-punching B) cold rolling C) welding D) powder coating
Structure A) bolted structure B) welded structure
Color A) as to our standard model B) according to customer's requests
Pack model A) standard export packing B) according to customer's requests
Package material A) transparent and dust-proof poly-sheet
B) hard carton paper
C) long and thin plywood bar
D) plywood pallet; steel and plastic straps
E) air bag used when loading container
MOQ 5-10 sets; the model is subject to your requirements
Payment A) T/T B) LC C) Paypal or Western Union
Warranty A) one year against manufacturing defect
B) 8-10 years of life time, offer lifetime consultation on problems occurred
Quantity A) 20' container B) 40' container C) a sample order
17500kgs 26000kgs 1 set
Delivery time In 15 days In 20 days In 7 days
Note All racks can be customized

The radio shuttle racking system is a new generation of high-density storage racking system which max your storage utilization and working efficiency. The warehouse radio shuttle rack system is a high-density storage system composed of racking, radio shuttle, and forklift. The radio shuttle running on the special rail and can be increased or decreased to raise and lower the pallet cargo, and return it to the position. The shuttle adopts a radio remote control and equipped with a battery to provide power, and running forward and backward with four wheels. The radio shuttle racking system is of a high-density storage rack system with high investment cost. It is suitable for the storage of large quantities and single species of goods for FIFO or FILO. But there is a special requirement for the bottom surface of the pallet. The space utilization rate of the warehouse radio shuttle rack system can reach 80%.

We are China professional pallet runner manufacturers. OEM and ODM are available. We can make an order with our best service. Welcome your kind inquiry.

Steel Material Warehouse Rack Storage Radio Shuttle Racking

1 Compared with drive in rack, it's high safety for forklift no need to enter the racking, which reduce shelf collision risk;
2 greatly improvedwarehouse cargo access efficiency ;
3 High warehouse utilization rate & work efficiency, greatly reduce job waiting time;
4 Different types of products can be levered flexible access;
5 More stable and safety on structure compared with drive in or drive through rack;
6 First in first out or first in last out can be realized;
7 can be automatically sorted and inventory;
8 Radio shuttle works at same time with forklift,which greatly improve shelf access efficiency

Steel Material Warehouse Rack Storage Radio Shuttle Racking
Infomatiion you need provide us:

The basic essential factor for designing of heavy duty pallet racking and warehouse:
First, cargo and pallet:
1. Cargo weight (including pallet or steel box pallet).
2. the size of pallet and cargo.
3. the direction as the fork lifter enters the pallet to deposit and withdrawal cargo.
Second, forks lifter:
* model or technical parameter of Forklift.
* biggest height of lift and the shortest distance for the channel to be used of forklift.
Third, warehouse:
1. the plane size of warehouse.
2. the only high can be used of warehouse.
3. the direction and the request as cargo enter the storehouse.

Steel Material Warehouse Rack Storage Radio Shuttle Racking

We ensure the most productive warehouse pallet rack solution is provided whether working from your plans or developing a cost-effective layout that is just right for your needs. You are assured of the best designed, most efficient and safest racking.

We also supply accessories like collumn guard, barrier, decking panel, adjustable base plate, wire mesh plate, truck rail etc, and other material handling equipment for warehouse storage.

Product Inquiry
Weixun intelligent & Weida logistics are both subsidiaries of Weixun group.
Jiangsu Weixun intelligent is one of the early intelligent warehouse logistics system equipment manufacturers in China.
We have the full line-ups of  racking, shelving and their matched products including  long span shelving, selective pallet rack, drive in rack, mezzanine rack and etc.
 Contact: Bryan  ( Export Director) 
 Mp / Whatsapp / Wechat: +86-13951807639
 Skype: bryanwuhongwei
 Email: weierzhou@wdracking.com

Scan on WeChat



Copyright © 2020 Jiangsu Weixun intelligent (formerly Nanjing Weida Metal Co., Ltd.). All Rights Reserved.