 Mp / Whatsapp / Wechat: +86-13951807639      Email: weierzhou@wdracking.com
Home / Products / Radio Shuttle Rack / Industrial Warehouse Radio Shuttle Racking
Share to:

Industrial Warehouse Radio Shuttle Racking

The Industrial Warehouse Radio Shuttle Racking is a high-density storage system that allows for excellent utilization of space. The system has many advantages, it allows storage of different reference numbers of codes per module. It saves time unloading pallets. Safer to use and less damage to the racking system as there is less interaction with a forklift. Industrial Warehouse Radio Shuttle Racking is also suitable for cold storage systems.
  • Shanghai, China
  • Pallet
  • L/C, T/T

The Industrial Warehouse Radio Shuttle Racking system has independent charging radio shuttles, allowing pallets to run on a guide rail with the control of a manual radio. The shuttle can reach under the pallets to access the goods that are stored deep within the rack system, lifting them from the guide rail and sending it to the front-end exit. Then you can use either a forklift to extract the goods or move the shuttle to another guide rail. The cold storage rack is a radio shuttle racking, and radio shuttle system. The high-density storage solution is commonly used for cold storage solutions.

Benefits of an Industrial Warehouse Radio Shuttle Racking

The radio shuttle racking system is sometimes compared to a drive in / drive through racking system because it allows a similar storage density. However, the radio shuttle provides significant advantages over other racking systems.

1. Safety

To retrieve pallets stored in the middle of a drive-in rack system, the forklift operator has to drive down a very long and narrow racking aisle, lift the pallet, and then reverse back out of the long and narrow racking aisle. Forklift operators can make simple mistakes like that even with normal aisles. The risk of an incident goes up as they drive deeper into the racking system. The risk is further increased because the place where a user is most likely to make a mistake is when they are deep inside the racking system. This puts the operator at even greater risk if an accident were to happen – they would be buried deep inside a collapsed rack system. 

Risks are greatly reduced by using a radio shuttle rack system. Forklift operators do not need to drive down narrow aisles to retrieve a pallet

Forklifts stay in normal aisles where operators are most familiar and comfortable. In the event of a racking incident, the employee would not be deep inside the racking system. 

2. The efficiency of a Radio Shuttle Rack

The Radio Shuttle System provides significant efficiency gains.

3. Drive Distance

Forklifts only need to come to the correct bay. The radio shuttle car then retrieves the pallet. Secondly, it brings the pallet to the front of the rack. The pallet is loaded by the forklift. The forklift saves time and fuel by not having to drive down a deep rack aisle.

4. Time

While the forklift removes one pallet (ie, for loading on a truck), the shuttle car can go to retrieve the next pallet and bring it to the edge of the rack system. This makes it much quicker to unload a bay of pallets using the Radio Shuttle System.

Contact us to request a quote on a Radio Shuttle System.

Application of Industrial Warehouse Radio Shuttle Racking

Food, beverage, chemical, tobacco and other single species, large quantities, and relatively single item product. Date critical cargo such as fruit and food can also be stored.

Industrial Warehouse Storage Radio Shuttle Heavy Duty Pallet Rack manufacturer

Industrial Warehouse Radio Shuttle Racking Detail Intruduction:

Model Radio Shuttle Rack
Pallet Size A) W1200*D1000mm B)W1200*D1200mm C) W1200*D1100mm D) W1200*D800mm
Materials Optional A) Quality Steel Q235A used for normal temperature storage situation
B) Quality Steel Q235B used for cold storage room
C) Environmental protection powder for surface treatment--powder coating
Craft-work A) hole-punching B) cold rolling C) welding D) powder coating
Structure A) bolted structure B) welded structure
Color A) as to our standard model B) according to customer's requests
Pack model A) standard export packing B) according to customer's requests
Package material A) transparent and dust-proof poly-sheet
B) hard carton paper
C) long and thin plywood bar
D) plywood pallet; steel and plastic straps
E) air bag used when loading container
MOQ 5-10 sets; the model is subject to your requirements
Payment A) T/T B) LC C) Paypal or Western Union
Warranty A) one year against manufacturing defect
B) 8-10 years of life time, offer lifetime consultation on problems occurred
Quantity A) 20' container B) 40' container C) a sample order

17500kgs 26000kgs 1 set
Delivery time In 15 days In 20 days In 7 days
Note All racks can be customized

The radio shuttle racking system is a new generation of high-density storage racking system which max your storage utilization and working efficiency. The warehouse radio shuttle rack system is a high-density storage system composed of racking, radio shuttle, and forklift. The radio shuttle running on the special rail and can be increased or decreased to raise and lower the pallet cargo, and return it to the position. The shuttle adopts a radio remote control and equipped with a battery to provide power, and running forward and backward with four wheels. The radio shuttle racking system is of a high-density storage rack system with high investment cost. It is suitable for the storage of large quantities and single species of goods for FIFO or FILO. But there is a special requirement for the bottom surface of the pallet. The space utilization rate of the warehouse radio shuttle rack system can reach 80%.

We are China professional pallet runner manufacturers. OEM and ODM are available. We can make an order with our best service. Welcome your kind inquiry.

Industrial Warehouse Storage Radio Shuttle Heavy Duty Pallet Rack manufacturer

1 Compared with drive in rack, it's high safety for forklift no need to enter the racking, which reduce shelf collision risk;
2 greatly improvedwarehouse cargo access efficiency ;
3 High warehouse utilization rate & work efficiency, greatly reduce job waiting time;
4 Different types of products can be levered flexible access;
5 More stable and safety on structure compared with drive in or drive through rack;
6 First in first out or first in last out can be realized;
7 can be automatically sorted and inventory;
8 Radio shuttle works at same time with forklift,which greatly improve shelf access efficiency

Industrial Warehouse Storage Radio Shuttle Heavy Duty Pallet Rack manufacturer
Infomatiion you need provide us:

The basic essential factor for designing of heavy duty pallet racking and warehouse:
First, cargo and pallet:
1. Cargo weight (including pallet or steel box pallet).
2. the size of pallet and cargo.
3. the direction as the fork lifter enters the pallet to deposit and withdrawal cargo.
Second, forks lifter:
* model or technical parameter of Forklift.
* biggest height of lift and the shortest distance for the channel to be used of forklift.
Third, warehouse:
1. the plane size of warehouse.
2. the only high can be used of warehouse.
3. the direction and the request as cargo enter the storehouse.

Industrial Warehouse Storage Radio Shuttle Heavy Duty Pallet Rack manufacturer

We ensure the most productive warehouse pallet rack solution is provided whether working from your plans or developing a cost-effective layout that is just right for your needs. You are assured of the best designed, most efficient and safest racking.

We also supply accessories like collumn guard, barrier, decking panel, adjustable base plate, wire mesh plate, truck rail etc, and other material handling equipment for warehouse storage.

Product Inquiry
Weixun intelligent & Weida logistics are both subsidiaries of Weixun group.
Jiangsu Weixun intelligent is one of the early intelligent warehouse logistics system equipment manufacturers in China.
We have the full line-ups of  racking, shelving and their matched products including  long span shelving, selective pallet rack, drive in rack, mezzanine rack and etc.
 Contact: Bryan  ( Export Director) 
 Mp / Whatsapp / Wechat: +86-13951807639
 Skype: bryanwuhongwei
 Email: weierzhou@wdracking.com

Scan on WeChat



Copyright © 2020 Jiangsu Weixun intelligent (formerly Nanjing Weida Metal Co., Ltd.). All Rights Reserved.